History of Windows Logo

Windows Logo change as per their newer version from 1985 to 2012

Java Installation Instructions for the SGH-U900

Install free JAVA games on Samsung Soul 


Download JADMaker here:
http://www.softpedia.com/get/Internet/Telephony-SMS-GSM/JADMaker.shtml

Download free JAVA games (240 x 320 )
http://gallery.mobile9.com/c/240-320-mobile-java-games/1/

Download Samsung PC Studio 3 (Optional)
http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=H...

Instructions (Steps 1-5 only need to be done once, not per JAVA install):
http://www.noeman.org/gsm/problems-solutions/63312-samsung-soul-sgh-u900-java-transfer-instructions.html

1) Type *#0002*28346#
It will bring up a menu:
[1] Load Params [0]
[2] Dump Params [0]
>>> Data Load Complete

3) Press "Back" 3 times
Menu should now be the following:
[1] Debug Screen
[2] Version Information
[3] RF test
[4] UMTS rf nv
[5] Read gsm rf nv
[6] Write gsm rf nv
[7] Base Band
[8] Audio
[9] Common

4) Press 9
Menu now shows:
[1] Batt. Temp
[2] FTM NV read
[3] FTN NV set
[4] FTN NV unset
[5] Version Info
[6] USB Configuration
[7] DIAG Configuration
[8] Power on info
[9] Camera Tuning (OFF)

4) Press 6
Menu now shows:
[1]Samsung USB[*]
[2]Qualcomm USB []
[3]PictBridge USB []

5) Press 2
Display should now say:
Qualcomm USB Configured.
Plz Reconnect the Cable.0

6) Unpack the Qualcomm USB drivers to a folder (exp. Desktop) but don’t install it.

7) Install BitPim.

8) Connect the SUPPLIED USB cable to the phone (PC Suite mode) and the PC.
Windows should now start its "Found New Hardware" wizard.
When asked about driver disks, direct the wizard to the folder in which you put the Qualcomm USB Drivers in.

9) Once the driver install has finished go to Device Manger and select "Modems" and choose Qualcomm Proprietary USB Modem. Depending on your version of windows depends on how you do the next bit. If using Vista click the Modem tab and write down the port listed in the top left. I dont have XP so can not tell you how to find port on it.

10) Open BitPim and configure the software for your U900 with the following settings:
Phone type: Other CDMA phone
Com port: *look at step 9* (you can browse the list, but chose the right one)
Press “OK”

10a) Restart computer. Once done, reconnect phone (PC Suite mode).

11) Start BitPim, go to the "View" menu and activate “View Filesystem”.

12) Click on “Filesystem” (Left hand frame in BitPim).
Now can you see a blue folder in the middle frame.

13) Click the "+" that is next to the blue folder.
Under the blue folder now says:
Retrieving....

14) Eventually you will see a filesystem tree, depending on what stored on your phone will depend on how long this takes to appear. Click the "+" icon next to the following 2 folders:
Media
Games

15) Open JADMaker, Drag & Drop your *.jar file into it and it will produce a corresponding *.jad file. YOU NEED BOTH FILES!!

16) In your middle BitPim frame, right click on "Games" and choose "Create Subdirectory". Name the directory to the name of the game / app you want to install, I suggest you put "PIM" at the end for reasons I will explain further down.

17) In the newly created directory Drag & Drop BOTH the *.jar and *.jad files.

18) repeat steps 17 & 18 for each piece of JAVA you want to install, but try to refrain from doing more than 4 - 5 new installs at a time as some may get missed during the next step.

19) Disconnect the USB cable.

20) Enter *#6984125*# into your phone:
It will bring up a menu titled "Admin Setting":
[1] Software version
[2] Pre-Configuration
[3] Network & call setting
[4] Internals
[5] Feature settings

21) Press 4
Master Key:

22) Enter the follwing *#9072641*#
Menu "Internals" now listed:
[1] Build information
[2] Debug settings
[3] Test mode
[4] Conditional featue
[5] Video call settings
[6] Protocol settings
[7] Storage setting
[8] Java settings
[9] Sound samples
[10] Test cases
[11] Timer

21) Press 7
Menu "Storage settings":
[1] Update media database
[2] Update Java DB
[3] Create records
[4] Create emails
[5] Create Nv
[6] Create call logs
[7] Update app database
[8] Create Ax DAT File

22) Press the following, wait until it says "Updated" or "Created" after each press until moving on:
1 "Update media database"
2 "Update Java DB"
8 "Create Ax DAT File"

23) Press "End Call" then restart phone. Test new games and apps which will be found under the entertainment menu.

24) Important: DON’T delete the JAVA from the mobile phone, you must delete the folder you placed it in from games within “BitPim”. IT WILL BRICK YOUR PHONE IF YOU DO NOT DO THIS!!!! This is why we entered "PIM" at the end of each folder from step 16 so we can identify which ones CANNOT be removed from the phone.

Another Method for Java Installation
 http://forum2.mobile-review.com/showthread.php?t=67350

First you need the “Qualcomm USB” drivers and “BitPim”. Prepare the USB cable, but dont put it in!

Driver: http://uploaded.to/?id=u8j08i
BitPim: http://sourceforge.net/projects/bitpim

a. Unpack the drivers to a folder (exp. Desktop), but don’t install it!
b. Install BitPim.


1. You must entering follow code: *#0523#
2. [9] common >> [6] USB Configuration >> [2] Qualcomm USB[*]
--> Qualcomm USB Configured.
Plz Reconnect the Cable.0

3. Now put the USB cable in the phone and Pc.
--> Windows found a new hardware.
Install the hardware manual and chose the Qualcommdriver folder.
Now go to the Hardware manger ->Modems->Qualcomm, you must know the port number.

4. Open “BitPim” and configure the software for your u700.

Phone type: Other CDMA phone
Com port: *look at step 5*(you can Browse, but chose the right one!)

And press “OK”

5. Start “BitPim”, go to the menu “View” and active “View Filesystem”.

6. Klick on “Filesystem” (left in BitPim).
Now can you see a blue folder, open the folder (press on “+”).
--> … retrieving

7. Now put the games (jar and jad files) in the follow folder “Games” (Media->Games).

8. Disconnect the USB cable from the phone.

9. Leave the Qualcomm menu and entering this code in your u700: *#6984125*#
Now are you in “Admin setting” menu.

a. Select the menu [4] Internals (Master Key: *#9072641*#)
b. Chose the menu [7] Storage settings
c. Update media database, Update Java DB and Create AX Dat File.

Samsung SGH U900 Secret Codes

Hard Reset
*2767*3855#


Test Menu
*#0002*28346#


Admin Menu
*#6984125*#

Under Admin Menu,
--Pre-Configuration
Operator Code -  *#73561*#

Under Admin Menu,
--Internals
Master Key *#9072641*#

English Wikipedia going offline for next 24hrs

"Do your homework early." That's the warning Wikipedia founder Jimmy Wales has issued some time ago. The reason, Wikipedia is going to blackout! The English version of the popular online encyclopedia will blackout and will be inaccessible for 24 hours starting the Tuesday-Wednesday midnight (10.30 AM on 18 January in India).

This is in protest of the anti-piract legislations, Protect IP Act (PIPA, the Senate bill) and the Stop Online Privacy Act (SOPA, the House bill), which the US State Congress is aiming to enact.

The blackout move by Wikipedia is the first major move by an internet company against the proposed legislations, which the entire Internet community has been vehemantly opposing. At the 17-18 Jan midnight EST Wikipedia's English version will go from white to a black background and remain so for 24 hours.

In India, the blackout will last for 24 hours starting at 10.30 AM on Wednesday 18 Jan. It is not clear if Google will also join suit, however, a couple of Google employees, through the Google Plus profiles, have been helping other portals effectively implement the blackout without getting their site ranking affecting in the search engine.

Source:- http://economictimes.indiatimes.com

Online Paste Tool

Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.

A pastebin is a type of web application that allows its users to upload snippets of text, usually samples of source code, for public viewing.

It provides application & tools for

1. Windows Desktop
2. Firefox
3. Chrome
4. iPhone & iPad
5. WebOS
6. Android
7. Mac
8. Opera
9. Click.to

Prepaid mobile users to be provided call, SMS, data usage details

The Telecom Regulatory Authority of India (TRAI) has released a set of guidelines for the interests of the prepaid customers. Under the new guidelines, the telecom operators are mandated to provide accurate updates on all the calls made and data usages by a prepaid mobile user. The telcos will have to send the details to the customer via SMS or USSD-based flash message. The details will also include information such as remaining prepaid balance after 2G/3G data usages. The TRAI believes the move will help make prepaid customers more aware about the charges levied by their respective telecom operators.

Among other notable changes have been specified by the TRAI is simplification of tariff vouchers. For easier identification, different vouchers will be given colour coding. The vouchers have been categorised as Plan Voucher, Top Up Voucher and Special Tariff Voucher (STV).

The Plan Voucher will be used for enrolling a consumer into a tariff plan. The voucher may also be used for enrolling a new customer or an existing customer. The Top Up Voucher will only feature monetary value ( in rupees) and shall be without any restrictions in terms of validity period or usage. The Special Tariff Voucher or STV could alter one or more items of applicable tariff in the consumer tariff plan in terms of limited or unlimited usage of voice calls, SMS or data. The validity of any STV shall not exceed ninety days. The STVs will not have any monetary value.

Also, the prepaid customers can avail full details of their account by placing a request to the telecom operator. The charges shall not exceed Rs. 50 and the information will be provided within 30 days to the consumer sent the request.

The new guidelines are part of the Telecom Consumers Protection Regulations, 2012, which is available on TRAI website www.trai.gov.in.

TRAI issues Telecom Consumer Protection Regulations 2012

The Telecom Regulatory Authority of India (TRAI) has come up with new regulation focused on protecting the interests of the consumer. Called the Telecom Consumer Protection Regulations, 2012, the regulations seek to provide information to pre-paid consumers on activation of voucher.

The new regulation demands that service provider provides information on the starter kit like SIM card, if applicable, mobile number (in cases where the subscriber is enrolled other than through mobile number portability), information about the type of connection - prepaid or post-paid and information about customer care number.

On activation of a subscription voucher, the service provider should provide through SMS information like activation of plan, title of the plan and validity period of the plan. Likewise, on activation of top-up voucher, the service provider should provide total amount charged, processing fee or administration charge, taxes deducted, net monetary value added and total available monetary value through SMS.

This is applicable to special tariff vouchers and any other plans the service provider may offer the consumer.

Pay Per Post

With a hat that size, you will have no trouble

Now that you've added your blog, we need to make sure that you own this blog.

Create a new post on your blog. Copy and paste the randomly generated sentence shown above exactly as it is given anywhere in your new post. Publish the new post so that it is viewable at your blog's URL.

Once this sentence is on your blog, come back to your PPP account and press the claim blog button. You can remove the post after you have successfully claimed the blog.